Got a Tail light flasher and new whelen light

B

Btm757

New Member
I ordered a Sho-Me 11.1005stt (Stop,Tail,Turn) and hooked it up to my L1224R bulbs and I also found a good deal on a whelen Talon single. I will get a second Talon when the money becomes available. and a Whelen avenger will go in the front glass.

Here is a Night video of the blinkies on. I will get a day video soon. Also I will get a video of the full function of the stt.

Here is the video

https://www.youtube.com/watch?v=597LMcHDJWo
 
Too much red, not enough amber, needs to be like mine.
It goes to the setup on the back of my truck at like 14-15 seconds

[ame]http://www.youtube.com/watch?v=pwdE__1DdXo[/ame]

I have front and rear, and ive recently added more to the front, changed the flash pattern on the hideaways, have to get a new video up. But mine are actual strobe bulbs.

What do you use your light for? Do alot of service calls?
 
Last edited:
Redneck_ranger said:
Is that just working off the tail light bulbs? And where can I get one of those modules?
Click to expand...

Yeah those are just the tail light bulbs. They are sylvania L1224R Joule LEDs.

The Module you can pickup on ebay for like $32 sometimes less

01B3000 said:
Too much red, not enough amber, needs to be like mine.
It goes to the setup on the back of my truck at like 14-15 seconds

http://www.youtube.com/watch?v=pwdE__1DdXo

I have front and rear, and ive recently added more to the front, changed the flash pattern on the hideaways, have to get a new video up. But mine are actual strobe bulbs.

What do you use your light for? Do alot of service calls?
Click to expand...

I tend to stop alot for people on the side of the road and I like the warning lights for added protection due to our slow down move over law for any vehicle displaying any combo of Red Blue or Amber.

The amber is in the back glass. I have 2 TIR3 Ambers that are gonna go somewhere on the bumper. or maybe the toolbox. I will be getting another Talon when the money is available. btw your setup looks good.
 
Thanks, and Mount them High, Too low to the ground, not everyone will see them.

And my ambers are TIR3 too.
 
Interesting... how does the flasher connect to the lights? Do you just tap into the existing tail light wiring or do you need do disconnect anything?
Does it also control the front turn signals?
 
Redneck_ranger said:
Would you be able to post a link for it? My phone doesn't like to cooperate with the internet. I'd appreciate it
Click to expand...

http://www.able2products.com/update/11_1005STT_v1.htm

You can find them on ebay.

buggman said:
Interesting... how does the flasher connect to the lights? Do you just tap into the existing tail light wiring or do you need do disconnect anything?
Does it also control the front turn signals?
Click to expand...


Only the rear however with a second module you can hook it up to the front and run the front lights off of that

http://www.able2products.com/pdfs/11_1005stt_instructions.pdf
 
You must log in or register to reply here.
Back
Top