I have a 1994 Ford Ranger xlt 4x4 4.0 v6, there is an intermiting ticking noise on the right side of the engine. I was told it was a lifter by a few people but another guy said it was from the coil pack. it ticks noticeably when first started but after it warms up it either gets really quiet or completely goes away. if I drive it a few miles it will start to tick again and then fade away after a few seconds. the truck runs great and has plenty of power. this is just kind of concerning for me. Also sometimes it's really hard to put it in first gear, the truck moves a little if I try to put it in first even with the clutch to the floor. it only happens 1/50 or so times though and only at a complete stop if I put it in neutral. sometimes it grinds a bit if I put it in reverse 1 out of every 30 times or so.
Join RangerForum.com Today - It's Totally Free! Are you a Ford Ranger fan? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online. Once you join you'll be able to post messages, upload pictures of your Ford, and have a great time with other Ranger fans. Whether your an old timer or just bought your Ford you'll find that Ranger Forum is a great community to join. Best of all it's totally free! Join RnagerForum.com Today!
the first thing to do is bleed the clutch, this is hard to do sometimes, air bubbles get trapped in the master. if that doesn"t help, maybe someone else can help you more, I am not a clutch or trans expert.
I lean toward a lifter for your tick..I thinkiing either there is some chunk built up a keep oil from flowing properly. most likely because it doesn't do it all the time. Maybe try an oil treatment like lucas run it a while then flush. Gear shifting problem could be air as said before...Another thought does it do it more when it has been running awhile ie: good and warm? The fire wall could be flexing enough to keep the clutch from fully dis-engaging. How many miles do you have on the clutch?
the clutch is brand new ~200miles or so on it, it doesn't matter if it's cold or hot. the clutch has been bled once. I am going to try bleeding it again when I get the chance and I'll see how that works out Edit: I noticed we are all in Michigan lol
might have a crack in your manifold i know my f-150 had a tick and when i changed over to headers the tick disappeared
Real late entry, with the engine off what does it shift like. Sound stupid? Try it and get back to us. The trans should shift into all gears with the engine off. Its how we bench check a trans after repair.
Am thinking the hyd master or slave cylinder is starting to fail and not disengaging the clutch fully at every actuation.
