buggman
Do not touch the trim!
I've taken all the guess work out of using your OEM fog light switch(es) to control your aftermarket fog lights... or your OEM fog lights if you prefer.
My kit allows you to use your OEM fog switch to control basically any aftermarket fog/driving lights and maintain the OEM look on your radio bezel.
Here's a pic of my bezel:
I'm using THREE OEM fog switches and THREE of my conversion kits to control: 1 My OEM fog lights, 2 My aux. fog/driving lights & 3 My extra reverse lights.
Here's what the conversion kit looks like:
Each kit uses OEM connectors that will plug into your OEM fog switch & will come with all the connectors you need for hook up. I also include a detailed instruction manual to make the install relatively painless.
All the critical connections are fused for added protection.
Some wiring is required, but fully explained in the instructions.
I test each kit several times during assembly and after it's completed to make sure everything works properly.
Each wire in the kit is labeled for easy installation & corresponds to the instruction manual.
This kit should take about 30 minutes to install.
Now you don't have to be stuck with those cheap on/off switches that come with most Fog/Driving light kits.
My conversion kit will allow you to turn your fog/driving lights WITHOUT needing to turn on your headlights AND you can have your fog/driving lights on WITH your high beams (check your local laws).
You WILL need to have your truck either running, key in the ON position or key in the ACC position for the lights to come on. This is done so you won't run your battery down if you forget to turn the lights off when you leave the vehicle.
If you already have OEM fog lights AND you want to use aftermarket lights too, all you need to do is modify your radio bezel to hold the 2nd OEM fog switch OR contact me and I can mod a bezel for you (contact me for pricing)
PRICING:
- Basic kit, includes wiring harness, fuse holders, relay, fuses, wiring connectors $20.00 FREE shipping to the USA
- Deluxe kit, includes basic kit PLUS a fog switch $30.00 FREE shipping to the USA
- Buy either kit & I'll do my standard fog switch LED mod for just $5.00 per fog switch. Your choice of colors for my fog switch LED mod, mix or match: Red, Blue, Green or White
- Buy the Deluxe kit & I'll do my fog switch ON indicator mod (changes the little "dash" ON indicator from green) for just $10.00 per fog switch modded.
As always, PayPal works for me.
My kit allows you to use your OEM fog switch to control basically any aftermarket fog/driving lights and maintain the OEM look on your radio bezel.
Here's a pic of my bezel:
I'm using THREE OEM fog switches and THREE of my conversion kits to control: 1 My OEM fog lights, 2 My aux. fog/driving lights & 3 My extra reverse lights.
Here's what the conversion kit looks like:
Each kit uses OEM connectors that will plug into your OEM fog switch & will come with all the connectors you need for hook up. I also include a detailed instruction manual to make the install relatively painless.
All the critical connections are fused for added protection.
Some wiring is required, but fully explained in the instructions.
I test each kit several times during assembly and after it's completed to make sure everything works properly.
Each wire in the kit is labeled for easy installation & corresponds to the instruction manual.
This kit should take about 30 minutes to install.
Now you don't have to be stuck with those cheap on/off switches that come with most Fog/Driving light kits.
My conversion kit will allow you to turn your fog/driving lights WITHOUT needing to turn on your headlights AND you can have your fog/driving lights on WITH your high beams (check your local laws).
You WILL need to have your truck either running, key in the ON position or key in the ACC position for the lights to come on. This is done so you won't run your battery down if you forget to turn the lights off when you leave the vehicle.
If you already have OEM fog lights AND you want to use aftermarket lights too, all you need to do is modify your radio bezel to hold the 2nd OEM fog switch OR contact me and I can mod a bezel for you (contact me for pricing)
PRICING:
- Basic kit, includes wiring harness, fuse holders, relay, fuses, wiring connectors $20.00 FREE shipping to the USA
- Deluxe kit, includes basic kit PLUS a fog switch $30.00 FREE shipping to the USA
- Buy either kit & I'll do my standard fog switch LED mod for just $5.00 per fog switch. Your choice of colors for my fog switch LED mod, mix or match: Red, Blue, Green or White
- Buy the Deluxe kit & I'll do my fog switch ON indicator mod (changes the little "dash" ON indicator from green) for just $10.00 per fog switch modded.
As always, PayPal works for me.
