If it is NOT the right key, the engine would not even turn start. There are a couple of things needed to be check, do you have enough fuel to the...
When the clutch engage, you will hear the roar of the fan blowing. After it has enough, the fan will move to the normal engine speed (slower).
Seem like you have some sort of leak. The best way to test for leak is "SMOKE" test, pumping smoke into your intake and see where it come out....
Gee, the original owner had to gave his truck away because of a mistake...
You shouldn't have to drill anything, if you go to the 60/40. It is the same size.
vacuum leak or IAC may also need to be clean or replace
Pretty much everything are the same. Although, emission stuffs maybe added to the newer motor. Why going with older engine?
As looked as that cylinder had water. Water will work as cleaner, when water enter the cylinder head it will break down the carbon.
The fan will always turn when the engine is running. As for the fan clutch, it will lock the fan in or release it as needed.
Look like you may have to drill out the rivet...
Are you using electrical fan? I believe this truck come with fan clutch type fan, the type your pulley turn the fan.
229,xxx on mine..
Seem like a pretty decent price if there is NO RUST. I would also replace NEW fuel pump as well as the filler hoses. The bed it self it is...
Going to be tough, cause NO BODY want to work...
I just go to my local auto part store and match it with heater hose. It is not as tough as the fuel hose, but it is only a vent.
Mine is doing the same. You will need to install shims to take up the backlash. I was told it is a pretty simple job, but not sure I want to...
Oh.... You are so lucky! I saw one of those on James Bond movies! Passenger or ex-wife eject button!
it is on the bigger line, your charging port will not fit the "High" side so if they are the same size line.
bad oil pressure sensor..
#2. Clean your IAC (idler air control) it is cylinder thing on the air intake. #3. Since you are in the toughest part of the country, I would...
Separate names with a comma.
