How-to: Fuel filler neck hose replacement - Discussion thread

Discussion in 'How-To Submissions' started by 03crewcab, Mar 11, 2013.

  1. 03crewcab

    03crewcab Real Trucks Rattle

    Disclaimer: RF.net nor me take any responsibility if you cause any injury to you, others helping you, or to your truck while performing this task. Please note that my truck is a Latin American Ranger, for which the pictures/procedures here may not necessarily apply completely to your truck. This is for informational purposes only. Be safe while performing any task on your truck. If you feel you do not have the capabilities to perform this task, please take it to a perfessional

    How-to: Fuel filler neck hose replacement
    By: 03crewcab

    I had a bad leak while pumping fuel on my truck. After some looking around, I found out it was because the hose end by the tank was cracked.

    Tools:
    T55 Torx bit
    7mm socket
    3/8'' to 1/4'' adapter
    1/2'' to 3/8'' adapter
    Breaker bar
    Ratchet
    5'' ratchet extension
    Screwdriver
    [​IMG]

    First, you need to remove the tailgate.

    After that, disconnect the taillights harness located by the spare tire hole on the bed.
    [​IMG]

    Now, here comes the fun part.

    First, we removed the bed bolts.
    [​IMG]

    Then, we disconnected the filler neck from the bed. Remember to keep all bolts some place safe, as well as the gas cap. Most of the filler neck was made of steel, as well as the vent tube, which is attached to the filler neck.
    [​IMG]

    After that, bed was removed. It is not that heavy. 2 people can lift it and remove it very simple. The 2 bolts by the cab are larger than the other 4 bolts.
    [​IMG]
    [​IMG]

    The cause of the fuel leak. Hose was pretty bad all around.
    [​IMG]

    After some wiggling, old hose was gone and the new was in. We needed to remove 2 worm clamps. We did not replace them since they still looked alright. New hose is 1.5'' in diameter.
    [​IMG]

    Here's a pic of the steel filler neck with vent tube. The smaller hose by the filler neck (which looks new/black) is the differential breather hose, which was broken in 5 diferent places. I replaced that as well.
    [​IMG]

    Once you're done replacing the new hose/filler neck, put the bed back, and place all bolts on the correct places. Just make sure everything is tightened properly.

    Remember that you removed/disconnected:
    3 bolts for the filler neck to attach to the side of the bed, and the gas cap.
    6 bed bolts
    Tailights harness
    Tailgate

    And that is it. After that, I went to the gas station and fill her up. No leaks at all.

    --
    Al
     
    Last edited by a moderator: Mar 11, 2013
  2. Ranger Forum Sign Up!

    Join RangerForum.com Today - It's Totally Free!

    Are you a Ford Ranger fan? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online.
    Once you join you'll be able to post messages, upload pictures of your Ford, and have a great time with other Ranger fans. Whether your an old timer or just bought your Ford you'll find that Ranger Forum is a great community to join. Best of all it's totally free!

    Join RnagerForum.com Today! JOIN FOR FREE

  3. Hooligan

    Hooligan Rangerholic!!

    Great write up! That was one hell of a crack there
     
  4. OP
    03crewcab

    03crewcab Real Trucks Rattle

    Thanks!
     
  5. Hooligan

    Hooligan Rangerholic!!

    You have to enter that truck in the Ranger of the month contest!
     
  6. SalRanger2

    SalRanger2 Ranger Lover

    nice man! i really want that crew cab lol
     
  7. Diablo

    Diablo New Member

    Me too!!!
     
  8. OP
    03crewcab

    03crewcab Real Trucks Rattle

    Thanks! I will see if i fulfill with the requirements for the contest, and enter it.

    Hope this write-up helps anyone having issues with the filler neck issue.
     
  9. pwrov1

    pwrov1 New Member

    Awesome how-to! Thank you! I think this might be the issue on my 04' just like your truck. Just went to my local Ford dealer and they gave me part # 4L5Z*9034*CA $282.14 USD+tax. Part is for a US 2004 SuperCab, think it might work or can trim it down maybe. Did you end up having a hose made for yours or did you use Ford factory parts? I'm going to take my bed off this weekend to look at mine. Thanks for any help!
     
    Last edited: Apr 18, 2013
  10. Scrambler82

    Scrambler82 Old Guy User

  11. pwrov1

    pwrov1 New Member

    Hey Scrambler82, thanks for the links! I got my hose fixed up, here are a few pix to share. Thanks again to everyone for the info here!
     
  12. OP
    03crewcab

    03crewcab Real Trucks Rattle

    Great news that you fixed the issue. The fuel leak must have been real bad. Hose looked in really bad shape.
     

Share This Page