Line-X or Rhino Bedliners?

Discussion in 'Exterior' started by rango88, Feb 26, 2013.

  1. rango88

    rango88 Chuck Norris Drove a Ram

    I was doing some research and overall the consensus is that Line x is the better product, just curious as to who has these in there trucks and their overall experience between the 2?
     
  2. Ranger Forum Sign Up!

    Join RangerForum.com Today - It's Totally Free!

    Are you a Ford Ranger fan? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online.
    Once you join you'll be able to post messages, upload pictures of your Ford, and have a great time with other Ranger fans. Whether your an old timer or just bought your Ford you'll find that Ranger Forum is a great community to join. Best of all it's totally free!

    Join RnagerForum.com Today! JOIN FOR FREE

  3. 06FordFX4

    06FordFX4 Canadian Redneck

    Line-x is far better,
    Rhino liner is "soft" if that makes sense. and it will tear and chunk up super easy with anything heavy or sharp in the bed.

    definitely go with line-x
     
  4. OP
    rango88

    rango88 Chuck Norris Drove a Ram

    thanks thats what I was going for. Plus I read that Rhino is a lot more slippery then line-x. Does one have to wait for it to dry or anything?
     
  5. SalRanger2

    SalRanger2 Ranger Lover

    i think my dads dodge has a line-x in it and its damn slippery and feels like sandpaper lol but it hasnt chipped off. i like the softer ones, they do gouge like said but its nice when stuff isnt sliding everywhere lol. id see if you can go to different places and check out some samples?
     
  6. 06FordFX4

    06FordFX4 Canadian Redneck

    Rhinos I be more grippy, but it's so not worth it if you avtually use your bed. It will look like garbage and do nothing to protect the bed once it tears and gouges back to the metal. Will have to get all the old stuff ripped up to put a new coat on.

    Expensive.

    Best bet if you don't want "slippery" (I don't find line x slippery at all) is to do the line x then throw a bedmat in. To provide grip.
     
  7. SalRanger2

    SalRanger2 Ranger Lover

    andy just go bare back with it lol!
     
  8. doyouquaxu

    doyouquaxu FUUUUUUUUUUUUU

    Got line-x with UV coating in my Sierra.

    This is yesterday, pallet is close to 2k lbs
    [​IMG]

    Last Friday
    [​IMG]

    Pallets have been dragged across it, metal tubing/plate/etc. slid in and out, leaking rear axles dripped all over, motor oil, and more. It's only a few months old, but a pressure washer gets it looking like new again. Zero complaints, best investment I have made.
     
  9. OP
    rango88

    rango88 Chuck Norris Drove a Ram

    Is there no concern for denting the bed since the material is almost directly on the steel? ( i'm merely asking due to inexperience)

    Also what was the approx cost of the job being done? I hear its about $500-625 range depending on the dealers and bedsize.
     
  10. OP
    rango88

    rango88 Chuck Norris Drove a Ram

    lol I rather not, the previous owner has scuffed the bed with things he loaded so I want that covered to protect it from rust plus scratches everywhere is pretty unsightly.
     
  11. djfllmn

    djfllmn ^^^ I am Mr. Clean!

    had rhino liner in my ranger...was dissapointed...F150 will be getting line-xed maybe...i have a rubber bed mat that works beautiful for what i need it for...dont have a single scratch in the bed of my truck
     
  12. Diablo

    Diablo New Member

  13. doyouquaxu

    doyouquaxu FUUUUUUUUUUUUU

    No dents so far, but that's mainly due to taking more care when loading things lol.

    Mine cost 550, its a crew cab short bed, 5.5-6ft was their price range. They also had a $100 off coupon on the Line-X facebook that you can get for "liking" their page. It was on the main Line-X page, not a dealer's
     
  14. OP
    rango88

    rango88 Chuck Norris Drove a Ram

    I'd go the bed mat route (like I did with the ranger) but the bed is already scratched and it bothers me. I'll get it sprayed and then put a bed mat on there soon enough as well
     
  15. OP
    rango88

    rango88 Chuck Norris Drove a Ram

    cool, I'll have a look on that facebook page as well, I have a crew cab shortbox as well so at least that gives me an idea. Thanks :)
     
  16. OP
    rango88

    rango88 Chuck Norris Drove a Ram

  17. Scrambler82

    Scrambler82 Old Guy User

    Not sure if you have the bed sprayed yet but I got line-X in my Ranger Steppie, the bed liner is really fine and looks good but the installer $ucked !
    I used Line-X of Salem, MA and he was all “I am the Best”, this should have rang the bell but I didn’t want to travel any further than I had to and he had a decent but not the cheapest price.

    I got it done while the bed was still off of the truck that may have been my problem but I got the bed sprayed, got it back to my shop, let it set for about a month before install and when I did the area around the bolts pushed up, like there was way too Much Line_X Material in the bolt recesses.

    I don’t like it but not a big deal, I went back to the dealer, talked to him and he said he can take care of it. I left the truck, went to pick it up and it looked the same, huh, didn’t get to it yet. I asked about it and he said there was no way to get rid of the raised portion without damaging the whole thing. I told him how I thought it should be done and of course I was wrong, I didn’t know anything.

    Oh ya, I wasn’t given a receipt yet either, I was told three times that it will be in the mail, another sign over looked.

    So I contacted Line_X Corp, and was told I needed a receipt, can’t blame them but I am stuck with a damaged bed liner.

    The rest of the liner is holding up great, and the Dealer in Salem has disappeared, Line-X Corp has not been able to do anything because of no receipt and I am stuck with it as is.

    The Line-X Dealer in another Town, the one I didn’t want to travel to says to bring it down and he will see what can be done but it will cost to have it fixed.

    To the original question… yes on Line-X, the look and the durability and I will have LIne-X done on my next truck but I will make sure through the Corporation as to the quality of the shop first.

    Find your shop, contact the Better Business Bureau and Line-X Corporation for insight to the Shop.

    added:

    Line-X of Salem is the wrong name for the business.
    The correct name is “North Shore Line-X of Salem", MA.
    I am now in a BBB inquiry with Line-X.
     
    Last edited: May 8, 2013
  18. OP
    rango88

    rango88 Chuck Norris Drove a Ram

    I havent done it so thanks on the insight before i did get around to doing it.
     
  19. Scrambler82

    Scrambler82 Old Guy User

    Some of these Shops are fly by night, a quick buck and disappear, if the shops in your area have been there for a while and have a good rep than they should be OK.

    Good Luck on the project.
     
  20. OP
    rango88

    rango88 Chuck Norris Drove a Ram

    Getting the bed Line-X tomorrow, how long should I wait to install my tonneau cover?
     
  21. Scrambler82

    Scrambler82 Old Guy User

    I would ask the shop doing the work but to me I would wait at least 30 days maybe even 60.
     

Share This Page