ford ranger 2011 4.0l power window

M

masbango

New Member
Hi
Both power window and locks don't work on my ford ranger 2011 4,0l.

Did check but there is no fuse box in the drivers side .

Where can I find it at the fuse box in the engine room.

I do have a manual for this Renger.

Appreciate

Bob
 
On your 2011, the fuses are located in the Smart Junction Box (SJB) which can be found behind the right (passenger) kick panel.
 
Don't know of a video, but I think I would just blow the fuse box out with an air hose. Once dry, I would spray some CRC contact cleaner all over it pretty good and see if that fixes your problem. Also, might want to find out WHY the box was flooded. Water had to come from somewhere.
 
mhoward said:
Don't know of a video, but I think I would just blow the fuse box out with an air hose. Once dry, I would spray some CRC contact cleaner all over it pretty good and see if that fixes your problem. Also, might want to find out WHY the box was flooded. Water had to come from somewhere.
Click to expand...
 
thanks for your reply . its was flooded by the storm so the water came above and cover the the under part of the cabin fuse box
 
You mean the entire truck was in a flood? If that is the case, you need to check the fluids in everything.
 
mhoward said:
You mean the entire truck was in a flood? If that is the case, you need to check the fluids in everything.
Click to expand...
there was no water in motor and transmission it came only to the level of where the cabin fuses are had to take the seats off to clean and would like to take the fuse box off to clean and check if connections are ok/ thnx for reply
 
If the water came that far up into the cab, the differential(s) will most likely be full of water, so if you haven't checked those, PLEASE do so. I wouldn't remove the SJB unless absolutely necessary. You COULD take a picture of it and then remove all fuses and relays to give it a proper cleaning and spray with good contact cleaner. Good luck!
 
Hi did take out the fusebox of my ranger 4.00 2011.

it is a mess so I need another one .

the fuse box code is
8L5T-14B476-CA

I saw another almost the same code its looks the same but for one letter
8L5T-14B476-A

it is only A not CA.

what does this mean ?

Is that for the program m need some explanation or advice.

Mine is with power locks windows mirror .

appreciate
Bob
 
Best I can tell, the suffix characters determine available options on the truck, such as power windows/locks group or DRL. To be safe, get the exact body control module that you are taking out.
 
You must log in or register to reply here.
Back
Top