2000 front hubs

Freemans 00

Active Member
Anyone know how to take the hubs apart. My problem is getting the black cover off I tried using a screwdriver I help pry but I really don't want to break it. And how hard is it to put back together? I'm just taking the silver T shaped metal clip out some of you may know what it does like I do.
 
Use a small chisel or flathead screwdriver and tap it w/ a hammer around the lip of the cap. Should pop right off.
 
You should do the manual hub swap. I did the swap and I love it! You can leave them unlocked and put your t case in 4lo and it will lock the rear so you have 2wd low range. It's great for popping high curbs or pulling a boat up a boat ramp. You can get a set of hubs for $160ish if I remember correctly.
 
You should do the manual hub swap. I did the swap and I love it! You can leave them unlocked and put your t case in 4lo and it will lock the rear so you have 2wd low range. It's great for popping high curbs or pulling a boat up a boat ramp. You can get a set of hubs for $160ish if I remember correctly.

That sounds great but I can do this fix for free lol. plus id hate getting out of the truck every 5 minutes or so in the winter to put in 4wd or in 2wd
 
Ill have that when I take the metal clip out lol the dust cover is just a pain in the ass to get off on mine. Im just going to take a pair of pliers and squeeze it if it breaks o well ill buy a new cover for like 10 bucks
 
Back
Top