Stalls when Vacuum plugs into EGR

Discussion in '1998 - 2011 Ford Ranger' started by Wrench_potato89, Feb 13, 2018.

  1. Wrench_potato89

    Wrench_potato89 New Member

    Hello,
    I hope somebody out there has enough experience to point me in the right direction.
    I have been working on my 1998 4 cylinder 2.5 l Ford Ranger XLT regular cab 5 speed

    It starts pretty rough and runs pretty rough as well. It eats up a ton of gas right now.

    (A quarter tank in just 30 miles) I'm still troubleshooting because I don't know quite what is wrong with it to be able to fix it. However I got a big clue but I'm still not sure what it means.
    I unpluged one of the vacuum lines from the EGR valve and the engine starded running better. I plugged it back in while the engine was running and it stalled and died immediately. My first guess was to replace the EGR valve but that did nothing. Still have the same result.
    No check engine light=No codes

    Work so far:
    Spark plugs
    Spark plug wires
    Ignition coils
    EGR valve
    Mass air flow sensor
    IAC valve
    Vacuum lines
     
  2. Ranger Forum Sign Up!

    Join RangerForum.com Today - It's Totally Free!

    Are you a Ford Ranger fan? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online.
    Once you join you'll be able to post messages, upload pictures of your Ford, and have a great time with other Ranger fans. Whether your an old timer or just bought your Ford you'll find that Ranger Forum is a great community to join. Best of all it's totally free!

    Join RnagerForum.com Today! JOIN FOR FREE

  3. mhoward

    mhoward Member

    Have a look at your evap solenoid. My sons 1999 XLT was slurping fuel at a phenomenal rate until he unhooked the evap solenoid. His MPG improved drastically. So, he got a used one at the local Pull-A-Part for five bucks and all is good now. Try pulling the vacuum line on the evap solenoid that comes FROM the engine. Plug the line and see how it runs and fuel economy. The solenoid is located on the driver side right near the ABS pump.
     
  4. Billy Tate

    Billy Tate New Member

    I’m kind of having the same issue my stalls and surges at stop signs and stop lights and idles ruff
    Changed
    Plugs and wires
    PCV valve
    Idle control valve
    Fuel filter
    Air filter
    Cleaned MAS
    Cleaned intake air temp sensor
    Pulled codes
    Po171
    Po174
    Po136
    P1131
    P1151
    I’d appreciate any help
     

Share This Page