4x4 problem

my 94 is having a 4x4 problem. it didnt work when i got it they said it was a bad module, i got a new one and its still didnt work so i got a new push button in the dash still no fix just replaced the transfer case motor and still not working, fuses are all good and i can only put it in 4x4 when the trans case is off and i turn it manually any ideas?????

 

Join RnagerForum.com Today!

Does it click when you push the button? There are TWO fuses under the hood for the t-case. Make sure ALL your wires are connected properly

 

maybe a bad hub? if one hub doesnt engage then neither of them will work.

 

^Not true...one will still spin if it engages (or has limited slip)

 

the module will click but the case wont engage but its in 4x4 if i turn it with a wrench lol took it through a field just to make sure it wasnt the hub and all my fuses are good and connection is good so i have no idea what the f*ck it is

 

Sounds like the motor to me. If you got a remanned one, it might be defected...I never trust remanned stuff like that...when I got mine, I made sure it was new...set me back a pretty penny but well worth it. Take your hubs apart, clean and regrease them too.

 

I had a bad 4x4 hub on the driver side and my 4wd light would come on but my front wheels were not engaged (either of them). I changed the driver side hub and it worked flawlessly.

 

^Auto or manual? Makes the difference...lol

 

Auto hubs and auto transfer case.

 

its elec, shift with manual hubs, and the truck the motor came out it work when it was in it i know this because i got it from a friends truck who was selling it and we just switched out the motor and he sold his with a bad motor in it but my light does not come on when i hit the 4x4 button and i have 3 different buttons i got from junk yards but they all work because i can here the module click when i hit the button