greenmachine2000
New Member
parts needed
-roof rack
-hack saw
-6 3/4 inch self tapping screwa
-drill with hex attachment for self tappers
-loctite adhesive sealant
-any good clear caulk
trim rails to fit roof measure with tape measure i cut from front plastic piece and marked 36 inches back.
after trimming and reassembling.
silicone under rails, put 6 3/4 inch self tapping screw (as indicated by red dots) with washer under screw if wanted caulk around base of rack.
Finished product
-roof rack
-hack saw
-6 3/4 inch self tapping screwa
-drill with hex attachment for self tappers
-loctite adhesive sealant
-any good clear caulk
trim rails to fit roof measure with tape measure i cut from front plastic piece and marked 36 inches back.
after trimming and reassembling.
silicone under rails, put 6 3/4 inch self tapping screw (as indicated by red dots) with washer under screw if wanted caulk around base of rack.
Finished product