Search results

My trip today was to a Pick a Part I had never been to before. It was a 95 miles or so away. It was ok but they didn't have a lot of vehicles. Great prices though. I did get a carpeted rear cab panel with the cargo net. I also picked up an A pillar trim to try a mod on. Got an interesting rear...

..............................................................

WELL....I took a bit of a road trip today. About 100 miles each way.. With my Jet chip installed..My truck is an 03 Edge with a 3.0v6 5 speed and 4.10 traction lok rear end. 215/85/16 tires...30.4" diameter. The chip is for a 2000 Ranger with a 3.0v6 automatic. When I got off the interstate my...

I can get you a deal on a 2.3 if you want to drive to western PA.....

I just changed mine today...I used an official alignment tool that I bought. It was a fairly easy job once I got the tool in place. The sync I removed looked fine, but I have 152,00 kilometers or 94,400 miles on my 3.0. I have had the Motorcraft replacement sync and sensor for over a year. I...

search craigslist..My brother just picked up a 2.3 and 5spd for $225.00. Already out and on a pallet. 120k miles I think..He needed the trans, but it was too good of a deal to pass up..

Yes they are D2S. I am running OEM Matsush*ita ballasts and ignitors from an Infinity G37. At the truck, the center of my headlights are about 36". A lifted truck would change things.

Yes that it correct. Personally, I have never liked adjusting headlights at 2.5" at 25 feet. I set these to be almost level at 25 feet. I will run them and see if they annoy anyone. Usually when I set headlights like this, no one flashes me. (at least with head lights that have a real cutoff.) I...

Have someone check the alternator. Run new grounds. Battery to engine and battery to body. I also run a ground from the engine/alternator to the body. Perform a wiggle test with the wires going to the fuse boxes.

Yes, I agree. Titled that direction is "acceptable" The projector rotation is extremely sensitive. I'm probably off 1/16 at the projector. Thanks

More photos.... The one is tilted slightly. "Close enough for Rock n Roll"

HID projectors are done....

Great suggestion Scrambler...Thanks for speaking up to improve the forum..

Deleted Deleted

I'll post some photos of the finished leds when I'm done. The reason you need the oem Ford bulb holders is that Ford has the contacts on the opposite side of the pcb(the side the bulb is on). The ebay ones have the contacts on the back side of the pcb. This makes the led mod a lot more...

That's what started this. I saw the Michelins at WalMart and wondered if they are any good..

Led mod photos . These are of the headlight switch, but it's the same principle.

First thing with the leds is you MUST use FORD bulb holders. The ebay ones will not work. I have standard mini leds in now. I am converting to SMD's The one's I got have the incorrect base for the EATC. What I did with the standard leds is the same as what I am planning for the SMD's. It's the...

Wow the PIAA SILENCIO XTRM cost $99.00 a pair...valeo also markets a SILENCIO XTRM. Wonder if they are the same?

What's the best wiper blade you've found? Summer? Winter? All season?