Which Speakers?

So I was driving around today and decided that I need new speakers. I want louder but crisp. So what would you guys suggest? The headunit is an Eonon 7" Touchscreen, love it and just want to bump it.

 

Join RnagerForum.com Today!

Alpine Type S. I have 2 of em in the back and they're kickass

 

So just replace the rear speakers? And what size are the OEM speakers?

 

I'd say put em in all of your speaker spots lol I only could find 2 at the jy, so that's all I did. Plus, the two of the four bostons I got worked. They're 240 watt max I believe, but have amazing quality even on the stock wiring

 

And I have 6x8s in nkw, but you can fit up to 6x9s

 

If you want good sound, I suggest swapping in a pair of 6.75" components in the front doors. Requires some truck modification(like an airsaw to sheetmetal), but the end result is amazing. I'm actually in the middle of pricing out a full new door speakers (powered via an amp)..... Likely a Hertz ESK 165 powered by a 75x4+350x1 amp.

If you're just looking for something better than stock that doesn't really break the bank or your wallet and doesn't really require an amplifier, look into Infiniti Reference 5x7's. I've had mine for a few years and LOVE them. For the rear, since you've got a reg cab, not much will make a big difference. A matching set of rear speakers is better than stock. References are competitively priced and won't break the bank.

I've also ran the Pioneer 5x7 mid-quality speaker that are available for el-cheapo right meow. They did great but they were missing the mid-range sound I was after.

 

6.5 or 6.75' either way X2, do component speakers.

Pioneer has some really good speakers for a reasonable price, listen to some before buying anything.

Chk out SonicElectronixs for some great pricing.

 

I recommend anything by Infiniti for speakers. Pioneer also makes great door mids and tweeters.

 

Hey Old Fart!!




I'm currently running these in my front doors.....LOVE 'EM and they don't break the bank:

5x7 Infinity Reference
http://www.crutchfield.com/p_108R8602CX/Infinity-Reference-X-REF-8602cfx.html?tp=93



Or these for a custom-fit, far better sound...

6 3/4" Infinity Reference Components
http://www.crutchfield.com/p_108R6500CX/Infinity-Reference-X-REF-6500cfx.html?tp=94

 

I've been really happy with my Kenwood 2 & 3 way 5x7 / 6x8's.
Have the 3 ways in the doors & the 2 ways in the back. Found them in the closeout/open box section of Crutchfield... less than half the price of new ones, when I got 'em (about a year or so apart) both boxes had been opened, but nothing inside had been removed.

Very crisp highs & great mids. Powering them via my 4ch MTX amp at about 50w per channel RMS crossed over at about 120hz.

With a little work you can get 6x9's in there if they're the only speakers you're running (aka no sub) to provide you a little more bass.

 

Thanks guys for the input. Now I have some research to do but now I have a direction.

 

Thanks for posting about Crutchfield's "Specials" section... if one is building an entire new system, good savings could be had! At least the components I've been considering are priced about 15-20% off. Thanks Buggman!